Low intensity A-LIOL2

Austin Insulators

•  Long-life low-energy LED technology lasts years longer than incandescent lights.
• Weather proof, corrosion resistant housing of heavy-duty anodized aluminum.
• Side and Bottom mounting holes are positioned for easy universal installation.

The A-LIOL2 LED Obstruction Light is an economical alternative to incandescent lighting for towers or masts.   Rugged construction, low power consumption and long life make this ideal for structures requiring a Low-Intensity light. This light has been designed to meet the Australian CASA MoS part 139 requirements, subsection 9.4.6.

The A-LIOL2 unitizes a tightly regulated power supply to maintain consistent photometric output under a wide range of operating conditions.   As a result the light is highly resistant to voltage swings, brown-outs, surges and spikes.   The same features that provide steady illumination also make the A-LIOL2 uniquely suited for use where intense RF fields may be encountered.

Austin’s A-LIOL2 may be operated as an independent unit, or be installed as part of a complete set of beacons and side-lights. It is also compatible with existing photocell controls.

The A-LIOL2 utilizes redundant LED elements, so light output is maintained at required levels in the unlikely event of multiple LED failures.  

Technical Specifications:

• Input Voltage: Nominal 115 or 240 volts at 50/60 Hz.   
• Constant Light Output that meets or exceeds regulatory requirements for input voltages ranging from 100 to 130 volts, or 205 to 255 volts.
• Maximum Load: 0.11 amps - 14 VA (at 115 volts input); Australian model specs to come
• Electrical Fittings: Capable of side or bottom mounting, using 3/4" NPT or M20 x 1.5 metric fittings.
• Physical Mounting: Pipe or flat base plate may be used.   Universal tower mounting brackets are an optional extra.
• Total Weight: 8.8 lbs (4 kgs)

Operating Temperature:
-55 to +55 C

Photometric Output:
Meets or exceeds: 
CASA MoS 139 9.4.6

Connections:
Terminal block will accept up to #12 stranded wire.

Grounds:
On terminal block

Electrical / Mounting Fittings:
1 side port and 1 bottom port.   Either 3/4” NPT or M20 x 1.5 metric thread.

Flat Plate Mounting:
3 mounting holes, 5/16" (8 mm). (See diagram on right)

Materials:
High-temperature shock-resistant
prismatic glass globe.
Cast Aluminum housing.
Neoprene weather gaskets.

Shipping:
14 lbs. 8” x 8” x 15”
6.3 kgs. 21 cm x 21 cm x 38 cm

Note: Specifications are subject to change without notice

Download Product Brochure (217 KB) A-L810 Brochure

Download Product Manual (133 KB) CASA 139 Section 9.4.6 Standard